Uline OHAUS EXPLORER H-4737 Manual Del Usuario página 19

5. If no items have been previously set up, the settings
screen appears. If items already exist in memory,
formulation begins. Press the ADD NEW button.
6. A new default component is added to the end of
the formula (default name, weight). To change the
default component name, press EDIT NAME. The
alpha-numeric entry screen appears.
7. Enter the new name, then press √. The display
returns to the previous screen with the new value
highlighted momentarily.
8. To change the default component weight, press EDIT
WEIGHT. The numeric entry screen appears.
9. Enter the new weight, then press √.
10. The display returns to the previous screen with the
new value highlighted momentarily.
PAGE 19 OF 96
OPERATION CONTINUED
11. Continue adding components as required for your
12. To change the order of a component in the formula,
13. To delete a component, touch the item to highlight it,
14. To clear all components, press CLEAR ALL. A
15. When finished, press RETURN TO APPLICATION.
16. Press BEGIN FORMULATION. Follow the screen
17. The component weight is shown on the main display
18. Press ACCEPT to add the weight of the component
19. The difference to the target is displayed for each
20. When finished, the formulation results screen is
formula.
touch the item to highlight it, then press MOVE UP or
MOVE DOWN.
and press DELETE ITEM.
confirmation is required.
instructions: Add the required component in the
formula.
line. The progress bar displays the fill status. Within
10% of the target value the progress bar converts to
fine resolution display.
to the total. The new total appears on the second
display line.
component (in weight and percent). Follow the
screen instructions to continue adding components
and pressing ACCEPT to complete the Formula.
displayed.
0721 IH-4737