Nogueira NEW PECUS G2 Serie Manual De Instrucciones página 139

After coupling, make sure there is sufficient
clearance between the tractor rear tire and the
machine, as shown in the picture besides.
Using the tractor stabilizers, center the machine
with the tractor and adjust the lateral clearance. If
you have any doubt, consult your tractor manual.
The stabilizing chain (R) - supplied with the
machine, has the function of stabilizing the
machine during transportation and harvesting,
relieving the load that is placed on the hydraulic
lifter from the tractor.
Secure one of the stabilizing chain edges (R) to the
coupling hole at the third point (P) and the other
edge to the right coupling point from the machine
(S), according to the picture beside.
Before checking the stabilizer chain straching,
make sure to keep a safe distance from the
machine when you lower it.
NOTE!
The use of the stabilizing chain (R) is
optional.
When setting the height in which the
machine will work, make sure that
the chain is completely stretched,
satisfactorily supporting a large part
of the machine weight.
CAUTION!
• Make sure that the hydraulic arms are
securely attached to the Harvester
before transporting or using it.
• Be sure to place the locking pins (E) on
the 3 coupling pins.
Failure to follow these instructions can
lead to personal injury and property
damage.
Instructions Manual
4. Preparation
GAP
P
R
S
E
35