4. Preparation
4.1- Leveling
Cross Level
Lift the machine about 20 cm from the ground.
Collect the support leg (A).
By looking from the tractor rear-end, check if
the machine is parallel with the ground.
Lower the machine and make the necessary
adjustments for leveling it.
Longitudinal Level
Looking at the machine on its side, check that
it is level. Make the corrections by adjusting the
arm length of the third point of the hydraulic lift.
W
hen maneuveRing With the machine coupled
,
in the tRactoR
check if theRe is enough space
to caRRy out the movements and if theRe aRe no
people oR animals neaR the machine
36
ATTENTION!
.
Instructions Manual