Intended Use; Important; Description Of The Machine - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

3.1- Intended use

This Harvester is designed and built to harvest and chop several types of forage crops
planted in line, such as corn, sorghum, sugar cane, grass and similars, producing
excellent forage for ensiling and daily treatment of animals.

IMPORTANT!

Machine performance may be affected under poor harvesting conditions,
such as: tilled, braided or lined crops, inadequate planting, improper
land for mechanized harvesting, etc.
t
his machine is designed exclusively foR use in agRicultuRal oR similaR opeRations and
should only be used foR its intended puRpose
. i
in the manual ts use is pRohibited in applications not mentioned
c
ompliance and stRict obseRvance of the opeRational conditions
,
RepaiRs as specified by the manufactuReR
o ,
peRation maintenance
caRRied out by competent
( 12.135 nR 12).
item of
t
he manufactuReR is not Responsible foR any aRbitRaRy modifications made to this machine
t
he WaRRanty Will Remain valid WheneveR the machine is used in accoRdance With the
instRuctions descRibed in this manual

3.1- Description of the machine

The New PECUS G2 is a one row harvester that works coupled to the three-point hydraulic
lift system of a category 2 agricultural tractor. The machine uses the power take-off of
the tractor as a power source (540 rpm). Harvest the crops at the desired height, chop
the selected size (21 different sizes are available) and launch the forage into wagons,
trucks and other storage and transport vehicle. Its precise system guarantees unique
cutting uniformity, ensuring the best results in the silage process, leaving the forage
homogeneous, as better compaction at the silo and keeping its nutritional qualities
unchanged.
ATTENTION!
,
,
aRe also essential elements of the intended use
,
inspection and otheR opeRations on this machine must be
, ,
qualified skilled oR authoRized WoRkeRs foR this puRpose
.
Instructions Manual
accoRding to the specifications contained
.
3. Presentation
,
maintenance and
.
.
27