Nogueira NEW PECUS G2 Serie Manual De Instrucciones página 184

6. Maintenance
Return the platform to the working position.
10.
When you return it, the scraper (R) will be
moved to the correct working position;
Articulate the platform again and tighten the
11.
3 bolts (N);
Finally, return the platform to the working
12.
position and replace the previously
disassembled items.
The scraper (R) must remain adjusted
with the smooth roller and not with
the counter-knife.
a ,
fteR adjusting Rotate the RotoR manually by
tuRning one full tuRn
is no contact betWeen the knives and the counteR
. i
knife f necessaRy
obseRving the maximum cleaRance of
betWeen the knives and the counteR knife
o
peRate the machine With a fRiction of knives
With counteR knife Will damage the machine and
could Result in the Release of fRagments that
could hit people and cause an accident involving
.
peRsonal injuRy
t ppe (p
he use of eRsonal
is mandatoRy duRing opeRation
and adjustment of the machine
gloves and eye pRotection
When handling knives and counteR knife
components have shaRp aReas that can cause
injuRy if handled Without pRopeR pRotection and
.
caRe
80
ATTENTION!
. o
bseRve caRefully if theRe
,
Repeat the adjustment
p e
Rotective quipment
,
maintenance
. W
eaR suitable
. t
ake special caRe
Instructions Manual
,
0.5
mm
.
)
,
these
N
R