Nogueira NEW PECUS G2 Serie Manual De Instrucciones página 165

Lift the protective cover (F);
7.
Insert the inverter tool (G) into the pulley hub
8.
of the rotor;
Using your hands, turn the inverter tool in the
9.
direction shown in the illustration. The feeding
rollers will rotate in the opposite direction to
the working direction, expelling (throwing
out) accumulated material into the platform.
Rotate until all material is removed.
After the "unclogging", remove the inverter
10.
tool (G) and store it;
Lower the protective cover (F);
11.
Fit the bolt, the two flat washers and the
12.
nut (E).
G
Instructions Manual
5. Operation
E
F
H
G
61