Smooth Drum's Scraper; 1- Scraper Adjustment - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

6.1- Smooth drum's scraper

The function of the scraper (R) is to prevent the
harvested crop from rolling onto the smooth drum
or accumulating inside the platform, blocking the
feed. To perform its function efficiently, the scraper
should remain positioned as close to the smooth
drum as possible without touching it.
The purpose of the scraper is not to
assist the rotor to chop the crops, this
function is only of the counter-knife.
The scraper should be adjusted with
the smooth drum and not with the
knives.

6.1.1- Scraper adjustment

ATTENTION!
Turn off the tractor and remove
the ignition key before starting the
following procedure.
In order to access the counter-knife, it is
1.
first necessary to articulate the platform,
proceeding as described in item 6.3;
Loosen the 3 bolts (N) and pull the scraper
2.
(R) all the way forward;
Keep the three bolts (N) loose and return
3.
the platform to the working position. When
closing it, the scraper (R) will be pushed to
the correct working position;
Open the platform again and tighten the bolts
4.
(N), securing the scraper (R).
Instructions Manual
6. Maintenance
R
COUNTER-KNIFE
SMOOTH
DRUM
R
N
81