Theoretical Length Of Cut - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

4. Preparation

4.1- Theoretical length of cut

The New PECUS G2 offers a variety of cut sizes
from a minimum of 2.0 mm to a maximum of 36
mm in length. The table below shows all possible
cutting sizes, gear pairs used, and the number of
knives required to obtain these sizes.
THEORETICAL LENGTH OF CUT
How to change the chopped size:
ATTENTION!
Turn off the tractor and remove
the ignition key before starting the
following procedure.
Remove the bolt (A) fixing the fairing (B);
1.
Lift the fairing (B);
2.
Prop the platform fairing in the raised position
3.
using the rod (C);
Remove the 2 bolts (D);
4.
Remove the cutting gearbox cover (E);
5.
Note in the table above which pair of gears
6.
should be mounted to obtain the desired
chop size
46
CHOPPING
Instructions Manual
A
B
C
D
E