Nogueira NEW PECUS G2 Serie Manual De Instrucciones página 198

8. Practical Guide
The machine does not gather the crop.
Probable cause
Broken safety pin(s).
Tr a c t o r b e l o w t h e m i n i m u m
recommended power.
Incorrect PTO speed.
Bad or uneven cut.
Probable cause
Dull rotor knives.
Worn rotor counter knife.
Rotor knives detached from counter
knife.
Low production.
Probable cause
Inconstant work speed.
Bad forage wagon transport logistic
or organization.
Inadequate tractor.
Improper ground for mechanized
harvesting.
94
Replace the safety pin(s).
Use a tractor with the recommended
power.
Use a speed of 540 rpm.
Sharpen the knives.
Turn over the knife or replace it.
Adjust the spacing between knives and
counter knife.
Try to keep your work speed as constant
as possible.
Organize the positioning and shifting
from forage wagons.
Use a tractor with adequate power.
Cultivate on proper ground.
Instructions Manual
Solution
Solution
Solution