Hydraulic System - Nogueira NEW PECUS G2 Serie Manual De Instrucciones

4. Preparation

4.1- Hydraulic system

Connecting the hoses to the tractor:
Remove the protective caps (R) from valves
1.
and hoses.
Couple the hoses onto the valves from the
2.
tractor's remote control, pushing firmly.
Make sure that the quick coupling is clean before
connecting it to the tractor valve. Dirt might
contaminate the system, prevent the correct
connection and preventing the oil flow.
NOTE!
In case of air inside the hoses or
hydraulic cylinders, fully activate the
levers several times in both directions,
eliminating air.
Disconnecting the hoses from the tractor:
To disconnect a hose, pull the quick hitch firmly
and quickly.
b
efoRe disconnecting the hoses
to Relieve the pRessuRe in the hydRaulic system
t ,
o do this tuRn off the tRactoR and activate the
,
leveRs some times
W
ith the contRol leveRs in the neutRal position
pull the hoses quickly
occuR With minimum oil loss
40
ATTENTION!
,
it is necessaRy
Relieving the system
:
the disconnection Will
.
Instructions Manual
.
.
,
R