Siemens SINUMERIK 840Di sl/840D sl Manual De Instrucciones página 174

Lista de los ficheros INI
A.16 MBDDE.INI
[DriveTextFiles]
ALDEV_80E5=f:\dh\mb.dir\aldvs_
ALDRV_80E5=f:\dh\mb.dir\aldrs_
;ALDEV_808F=f:\dh\mb.dir\aldvu_
;ALDRV_808F=f:\dh\mb.dir\aldru_
ALDEV_x=f:\dh\mb.dir\aldvp_
ALDRV_x=f:\dh\mb.dir\aldrp_
[IndexTextFiles]
ALNX=f:\dh\mb.dir\alnx_
ALSI=f:\dh\mb.dir\alsi_
; default definition of the priorities of the different alarm types
[DEFAULTPRIO]
CANCEL=100
RESET=100
POWERON=100
NCSTART=100
PLC=100
PLCMSG=100
MMC=100
; This section defines different characteristics of the protocol
that
; specifies how particular error messages are to be registered.
[PROTOCOL]
Los detalles sobre la formación de expresiones de filtro para el control del volumen de
avisos se encuentran en el apartado "Configurar el espacio de memoria del protocolo de
alarma".
; Criteria for selecting the alarm messages to be recorded. The
notation
; is described in SINUMERIK 840D OEM package HMI User's Manual.
Filtro=expresión
; Characterizes the numbers of entries in the log file. If the
actual
; number exceeds this value, the server starts to override old
entries
; (principle: ring buffer)
Records=150
; Mode of alarm protocol writing
; if a number of less than -1 is specified, this number of protocol
files is
; parallely held, and one of them is actually used
; if a number of -1 is specified, the protocol-file is not
automatically updated
; if 0 is specified the protocol file is immediately updated
; if a number above 0 is specified, the protocol file is updated
after the
170
Manual de puesta en servicio, 11/2006, 6FC5397-0DP10-0EA0
HMI-Advanced