Siemens SINUMERIK 840Di sl/840D sl Manual De Instrucciones página 179

; ActionLog (registrador de acciones) parameters
[ActionLog]
; CommitLatency tells how many seconds after creation an ActionLog
; record is written to disk at latest. If this value is less than 0
there is no
; time controlled automatic writing to disk at all
; Default : CommitLatency = -1
; no automatic writing
CommitLatency = -1
; DirectoryPath specifies the directory of the logfiles
DirectoryPath = D:\AC_LOG
; FileSize gives the upper limit of logfile size in bytes
FileSize = 40000
; VariableN allows monitoring of max 10 NC/PLC variables. The first
; parameter is numericand provides the monitoring mode:
; if Bit0 is set and the value of the variable changes, the value
changes
; are protocolled in the ActionLog files
; if Bit1 is set and the value of the variable changes, the
ActionLog files
; are commited to disk
; Default : Variable0 = 1, /Channel/ProgramInfo/msg
; monitor part program messages
Variable0 = 1, /Channel/ProgramInfo/msg
; CommittedAlarms holds up to 10 comma separated alarm numbers.
; Changes of these alarms commit
; ActionLog data to disk
; Default : CommittedAlarms = 3000
; commit on emergency stop
CommittedAlarms = 3000
; for working with SIMNC uncomment the following section descriptor
; by this way a sim-process will be started to be used as a machine
;[NCDDE_STARTCMD]
CMD=dpncsim.exe /T:1 /P:0
WND_CLASS=SIM_LOCAL_NCK
WND_NAME=SIM_LOCAL_NCK
STARTUP_TIMEOUT=50
;WAIT_SYNC_MESSAGE=
CLOSE_TIMEOUT=30
[WP_SELECT]
; for displaying a message that TOA/TMA-data on NCK will be
overwritten
;TOA_WARNING_MESSAGE = yes/no
TOA_WARNING_MESSAGE=yes
HMI-Advanced
Manual de puesta en servicio, 11/2006, 6FC5397-0DP10-0EA0
Lista de los ficheros INI
A.17 MMC.INI
175