Siemens SINUMERIK 840Di sl/840D sl Manual De Instrucciones página 175

; specified number of seconds elapsed with no intermediate alarm
state
; changes. t he protocol-file is always updated when you send the
; DDE-Command: "AlarmProt" to the MBDDE-server
; (principle: ring buffer)
---------------------------------------------------------------
DiskCare=−1 # attention: the mode changed from V4 to V5 !
También la estrategia de ficheros múltiples se puede seleccionar
en el fichero ini mediante la entrada DiskCare.
; information about the keys that may be used to clear an alarm
[KEYS]
; A function-key (e.g. ESCAPE) is assigned the cancel function.
; This makes it possible to acknowledge cancel-alarms on the
; PC development system, too.
---------------------------------------------------------------
Cancel=Escape
; This section specifies the names and paths of the help files that
; contain help texts in the WinHelp format.
; This list includes a maximum of 10 entries.
; The filename fragments must not exceed 6 chars, because it is
; extended automatically by the message module according to the
; selected language. A filename extension may be appended
optionally.
; For additional information see SINUMERIK 840D OEM package
; HMI User's Manual.
[Helpcontext]
File0=hlp\alarm_ .pdf
Para usuarios OEM:
; reserve some sender names of HMI alarms. The names mbdde,
; NCU and PLC are reserved for mbdde internal purposes.
[MmcAlarmDisable]
DisableSenderOfMmcAlarm0=mbdde
DisableSenderOfMmcAlarm1=NCU
DisableSenderOfMmcAlarm2=PLC
DisableSenderOfMmcAlarm3=
DisableSenderOfMmcAlarm4=
DisableSenderOfMmcAlarm5=
DisableSenderOfMmcAlarm6=
DisableSenderOfMmcAlarm7=
DisableSenderOfMmcAlarm8=
HMI-Advanced
Manual de puesta en servicio, 11/2006, 6FC5397-0DP10-0EA0
Lista de los ficheros INI
A.16 MBDDE.INI
171