Abicor Binzel iCAT Instructivo De Servicio página 60

6 Putting into operation
6.8 Attaching the ABIROB
1
®
1
ABIROB GC torch neck
2 Protective cap
Fig. 13 Attaching the ABIROB
EN - 24
®
GC torch neck
2
3
Retaining nut
4 iCAT ABIROB
®
GC torch neck
®
1 Equip the ABIROB
nozzle.
 Instruction leaflet BEI.0073.
2 Slide retaining nut (3) and protective cap (2) onto the ABIROB
neck (1) from the front.
®
3 Mount the ABIROB
positioning pin (5) in the iCAT ABIROB
®
4 Tighten ABIROB GC torch neck (1) with retaining nut (3) on the
®
iCAT ABIROB GC (4). Use a wrench AF20 suitable for this purpose.
5 Replace protective cap (2).
3
5
®
GC
GC torch neck (1) with tip adaptor, contact tip and gas
GC torch neck (1) with positioning bore onto
®
GC (4).
4
5
Positioning pin
®
GC torch
iCAT