Abicor Binzel iCAT Instructivo De Servicio página 71

iCAT
12 Disposal
12.1 Materials
12.2 Consumables
12.3 Packaging
When disposing of the system, the local regulations, laws, provisions,
standards and guidelines must be observed. To correctly dispose of the
product, it must first be disassembled.
 11 Dismounting on page EN-34
This product is mainly made of metallic materials which can be melted in steel
and iron works and are thus almost infinitely recyclable. The plastic materials
used are marked in preparation for sorting and separation of the materials for
later recycling.
Oils, greases and cleaning agents must not contaminate the ground or enter
sewage systems. These materials must be stored, transported and disposed of
in suitable containers. Observe the relevant local regulations and disposal
instructions of the safety data sheets specified by the manufacturer of the
consumables. Contaminated cleaning tools (brushes, rags, etc.) must also be
disposed of in accordance with the information provided by the manufacturer
of the consumables.
ABICOR BINZEL has reduced the transport packaging to the necessary
minimum. Packaging materials are always selected with regard to their
possible recycling ability.
12 Disposal
EN - 35