Attaching The Abirob ® A Torch Neck - Abicor Binzel iCAT Instructivo De Servicio

6 Putting into operation
6.6 Attaching the ABIROB
1
®
1 ABIROB A torch neck
2 Hexagon wrench
Fig. 11 Attaching the ABIROB
EN - 22
®
A torch neck
3 iCAT ABIROB
®
A torch neck
®
1 Equip the ABIROB
nozzle.
 Instruction leaflet BEI.0068.
®
2 Insert ABIROB A torch neck (1) via the guide grooves into the
®
iCAT ABIROB A (3) as far as it will go.
3 Tighten the set screws (4) with a hexagon wrench (2). Tightening torque
M= 2.5 Nm.
2
®
A 4
A torch neck (1) with a tip adaptor, contact tip and gas
3
5
2 set screws
iCAT