Attaching The Abirob ® W Torch Neck - Abicor Binzel iCAT Instructivo De Servicio

iCAT
6.7 Attaching the ABIROB
1
®
1 ABIROB W torch neck
2 Positioning pin
Fig. 12 Attaching the ABIROB
®
W torch neck
3 iCAT ABIROB
®
W torch neck
®
1 Equip the ABIROB
nozzle.
2 Introduce positioning pin (2) into marked bore.
®
The ABIROB W torch neck (1) can only be fastened in this position.
3 Screw down ABIROB
®
iCAT ABIROB W (3).
NOTICE
• After using the torch for several days, it may happen that it cannot be
disconnected by hand. To do this, a suitable wrench is available. Do not
use pliers to disconnect the torch.
2
®
W 4
W torch neck (1) with tip adaptor, contact tip and gas
®
W torch neck (1) with retaining nut (4) on the
6 Putting into operation
3
4
Retaining nut
EN - 23