Grundfos Conex DIA-G Instrucciones De Instalación Y Funcionamiento página 50

A 1 2
Icon 1
Icon 2
Icon 3
Icon Display Description
For configured alarm relay
Icon 1 A (inverted display on active
alarm)
For configured limit value 1
Icon 2 1 (inverted display when value
exceeded)
For configured limit value 2
Icon 3 2 (inverted display when value
exceeded)
For configured potentiostatic
sensor (inverted display on
Icon 4 S
active connection to sensor
interface)
Display for active battery backup
Active battery backup mode (device supplied with 24
VDC externally) is indicated in the display as follows:
Cl Cl
2 2
0.30 4.00
Alarm row 1
Alarm row 2
Battery backup
0.30 4.00
Alarm row 1
Alarm row 2
The display changes cyclically between the standard
header and the display text "Battery backup".
50
S
Icon 4
Display option for no sensors
No sensor
Special display if no sensor is set in the "Setup"
menu.
Reading measured values
In display mode, the current measured values can
always be read.
If one sensor is connected:
Cl
2
0.30 ppm
If two sensors are connected:
Cl Cl
2 2
0.30 ppm
0.35 ppm
11.12.2 Reading error messages
Error messages are displayed directly on the display.
Cl Cl
2 2
0.30 4.00
Alarm row 1
Alarm row 2
In case of several error messages, they are
displayed one after another. They can be viewed by
pressing the [Up] or [Down] button.