EN
FlexPAK 800/1000 DX
6.2.1
Flushing duct
The unit is flushing the duct system. This message is shown when FlushCy1 and FlushCy2
activate the flush valve. This message is also shown when FlushTemp is activated, see Sections
'7.3.1 FlushTmr' ,'7.3.9 FlushCy1', '7.3.10 FlushCy2' and '7.3.11 FlushTMP activation'.
NOTE!
Flushing
Duct
Cycl1 00.00
Cycl 2 00:00
NOTE!
manual'.
6.2.2
Emptying preseparator
Emptying
Preseparator
Bin 1 00:00s
Bin 2 00:00s
6.2.3
Open Upper Slide Valve V12
Open Upper
Slide Valve
Remaining
Time 00:00s
6.2.4
Close Upper Slide Valve V12
Close Upper
Slide Valve
Remaining
Time 00:00s
6.2.5
Open Lower Slide Valve V11
Emptying Bin
Open Lower Slide Valve
Remaining
Time 00:00s
6.2.6
Close Lower Slide Valve V11
Emptying Bin
Close Lower Slide Valve
Remaining
Time 00:00s
6.3
Warning messages
If a warning is activated, there is a problem that needs to be corrected, but the unit continues to
work. If a warning message is displayed in the PLC display, the light in the Standby/Running
34
All manuals and user guides at all-guides.com
This screen displays regardless of whether a flush valve is installed or not.
Cycl1: The time remaining for the flush cycle with the flush valve 1
(SFV1).
Cycl2: The time remaining for the flush cycle with the flush valve 2
(SFV2).
ESC
OK
For a description of the following displays please see the 'Installation and service
ESC
OK
ESC
OK
ESC
OK
ESC
OK
ESC
OK