Nederman FlexPAK 800 Manual Del Usuario página 41

All manuals and user guides at all-guides.com
NOTE!
If the weekly timer has been activated, the amount of time the unit can be used during the
day before it automatically goes into Off mode can be extended if the optional external standby
button accessory is used, see Section '7.3.5 OTTmr'.
Below is how to make adjustments to the default settings for the weekly timer.
WeekTim 1, Monday–Friday mornings
WeekTim 1
D=---------
On=07:00
Off=12:00
ESC OK
1.
Press to go to the unit's date and time screen.
2.
Press ESC to get to the main menu.
3.
to go to >Set Param.
Press
4.
Press OK to confirm.
5.
Use or to find the parameter 'WeekTim1'.
6.
Press OK to confirm.
7.
D = ------- denotes the weekdays (MTWTFSS) to which the setting applies. Move the cursor
to the weekday to be changed with
8.
Activate the appropriate weekday with
9.
Step forward with to the next day to be changed.
10.
Select an appropriate value with
11.
Step forward with to the time character to be changed, to set the ON time.
12.
Select an appropriate value with
13.
Proceed until the required time is shown.
14.
Repeat the same procedure for the OFF time.
15.
Press OK to confirm.
ESC
16.
Press to go to the main menu.
ESC
17.
Press to go to the date and time screen.
18.
Press to exit.
Setting WeekTim 2, Monday–Friday afternoons
WeekTim 2
D=MTWTF--
On=13:00
Off=16:00
ESC OK
Make the settings according to the previous section.
Setting WeekTim 3, Saturday–Sunday afternoons
WeekTim 3
D=-----SS
On=--:--
Off=--:--
ESC OK
Make the settings according to the previous section.
Setting WeekTim 4
WeekTim 4 is to be set to off at all times.
NOTE!
For the following parameters there space available beside the figures for customer specific
settings.
FlexPAK 800/1000 DX
or .
or .
or .
or .
EN
41