Weekly Timer - Nederman FlexPAK 800 Manual Del Usuario

EN FlexPAK 800/1000 DX
4.
Press
>
Clock
Contrast
Start Screen
5.
Press
>
SetClock
S/W Time
Sync
6.
Press
Set Clock
Su 00:00
YYYY-MM-DD
2011-12-01
7.
The cursor shows the day of the week, which flashes since it is the first value that is selected.
8.
Change the weekday with
9.
Move the cursor to the next position with
10.
Make any other necessary setting as shown in items 2 and 3 above.
11.
Press
12.
Press
13.
Press
14.
Press
7.2.2

Weekly timer

There are four different timers:
•
WeekTim 1
•
WeekTim 2
•
WeekTim 3
•
WeekTim 4.
WeekTim 1 and WeekTim 2 have the following default settings:
•
WeekTim 1: The unit switches to standby on Monday, Tuesday, Wednesday, Thursday and
Friday at 07:00 and switches off at 12:00.
•
WeekTim 2: The unit switches to standby Monday, Tuesday, Wednesday, Thursday and
Friday at 13:00 and switches off at 16:00.
WeekTim 3 and WeekTim 4 have the following default settings:
•
WeekTim 3 is suitable when you need to start/stop on Saturdays and Sundays.
•
WeekTim 4 is always off.
The settings can be changed to accommodate a suitable time schedule.
NOTE!
will start immediately once the timer puts the unit in standby mode.
It is not necessary to use the timer function. The function can be switched off by setting the display
to show only dashes. However, it is recommended that the timer function is used, as this ensures
that the unit is switched off even when a valve remains open, for example, over night.
40
All manuals and user guides at all-guides.com
OK
to confirm.
ESC OK
OK to confirm.
ESC OK
OK
to confirm.
ESC OK
or
OK to confirm.
ESC
to go to the main menu.
ESC
to go to the date and time screen.
to exit.
When the timer stops the unit and a valve at a workstation is in its open position, the unit
.
or .