Parameter Settings; Adjust The Time And Date - Nederman FlexPAK 800 Manual Del Usuario

All manuals and user guides at all-guides.com
Stop
>
Set Param
Set
Prg Name
3.
Press to go to >Set Param.
4.
OK
Press to confirm.
5.
Use or
6.
Press OK to confirm.
7.
Use and
NOTE!
The blinking cursor shows the current value that can be changed.
8.
Use or
9.
Press OK to confirm.
ESC
10.
Press to go to the main menu.
ESC
11.
Press to go to the date and time screen.
12.
Press to exit.
7.2

Parameter settings

The following PLC displays show the different settings that can be configured for the unit.
NOTE!
Except for 'Adjust the time' and 'Weekly timer', there is space available beside the
PLC displays to enter customer specific settings that differ from the default values shown in this
manual.
7.2.1

Adjust the time and date

Nederman
FlexPAK Off
TimeToService
2000Hour
1.
From a PLC status screen, press
Su 00:00
2012-01-01
NOTE!
There are several other input menus on the same level as the clock start screen. If the
pressing
2.
Press ESC to get to the main menu.
3.
Press to go to >Set.
Stop
Set Param
>
Set
Prg Name
ESC OK
to find the parameter.
to select a value.
to set the value.
ESC OK
to go to the unit's date and time screen.
ESC OK
takes the PLC to one of those menus, use
ESC OK
FlexPAK 800/1000 DX
to get to the clock start screen.
EN
39