Grundfos SL1 Serie Instrucciones De Instalación Y Funcionamiento página 6

3. Delivery and handling
The pump may be transported and stored in a vertical or
horizontal position. Make sure that it cannot roll or fall over.
3.1 Transportation
All lifting equipment must be rated for the purpose and checked
for damage before any attempts to lift the pump. The lifting
equipment rating must under no circumstances be exceeded.
The pump weight is stated on the pump nameplate.
Warning
Always lift the pump by its lifting bracket or by means
of a fork-lift truck if the pump is fixed on a pallet.
Never lift the pump by means of the motor cable or
the hose/pipe.
3.2 Storage
During long periods of storage, the pump must be protected
against moisture and heat.
Storage temperature: -30 °C - +60 °C
Warning
If the pump is stored for more than one year or it
takes a long time before it is put into operation after
the installation, the impeller must be turned at least
once a month.
If the pump has been in use, the oil should be changed before
storage.
After a long period of storage, the pump should be inspected
before it is put into operation. Make sure that the impeller can
rotate freely. Pay special attention to the condition of the shaft
seal, O-rings, oil and the cable entry.
6
4. Identification
4.1 Nameplate
The nameplate states the operating data and approvals applying
to the pump. The nameplate is fitted to the side of the motor
housing close to the cable entry.
Fix the extra nameplate supplied with the pump to the cable end
in the control cabinet.
1
CE0344
II2G
KEMA 08ATEX 0125X
2
3
Ex cd llB T4, T3 Gb
4
Type: SLV.80.80.110.EX.2.51D
Model: 9687208500000001
5
P.c. 0845 IP68
6
Hmax:
9 44.9 m
Motor: 3 ~
11
P1: 12.5 kW
13
-1
15 n: min
2950
17 380-415 V
V
19
50 Hz Insul.class:
21
EN 12050-1
23
Made in Tatabanya. Hungary
DK-8850 Bjerringbro, Denmark
0197
Fig. 3 Nameplate
Pos. Description
1 Ex mark
2 Type designation
3 Model number
4 Production code (year/week)
5 Maximum head
6 Maximum installation depth
7 Number of phases
8 Rated voltage, D
9 Rated voltage, Y
10 Rated input power
11 Power factor
13 Country of production
14 CE mark
16 Maximum liquid temperature
17 Maximum flow rate
19 Enclosure class to IEC
20 Rated speed
21 Frequency
22 Rated current, D
23 Rated current, Y
24 Shaft power
25 Insulation class
27 Weight without cable
96771279
7
20 m
8
3
Qmax: 90 m h / 10
Tmax.:
40
C
12
P2: 11.0
kW
14
0.89
16
A
22.4-20.8
18
A
20
H 22
Weight: kg
180
24
25