Publicidad
k)
Do not move, adjust or rotate the device in the
course of work.
l)
Clean the device regularly to prevent stubborn grime
from accumulating.
m)
Do not cover the air intake and outlet.
n)
The device is not a toy. Cleaning and maintenance
may not be carried out by children without
supervision by an adult person.
o)
It is forbidden to interfere with the structure of
the device in order to change its parameters or
construction.
p)
Keep the device away from sources of fire and heat.
q)
Do not overload the device.
r)
Do not install, remove, adjust or service the discharge
screen of any other parts while the engine is running.
s)
When the engine is running, keep all body parts and
heavy objects away from the loading hopper and the
outlet chute.
t)
Do not insert the limbs into the loading hopper and
the chip outlet while the machine is running. It may
result in pulling in and/or cutting the limbs.
u)
Do not feed metal, rocks, bottles, cans on any other
non-botanical objects into the machine.
v)
Rotating cutting blades inside these openings will
cause serious personal injury if touched.
w)
Be careful while working. The machine can eject
fragments of processed material from the loading
hopper or outlet chute.
x)
The engine gets very hot during operation. Do not
touch the hot engine because it may cause burns.
y)
In order to avoid fire hazard, keep leaves, grass
and other combustible materials away from the hot
engine and muffler.
z)
Do not operate on pavement, gravel or other hard
surfaces since objects might ricochet and cause
injury.
aa)
Some tree species may cause an allergic reaction.
Dust coming out during branch processing may be
harmful, appropriate protective measures should be
taken.
bb)
Do not operate on uneven ground or in case the unit
is unstable.
cc)
Please note! The processed material may bounce
off the loading hopper or be ejected from the outlet
chute.
dd)
If the chipped shredder jams or becomes clogged,
shut off the engine immediately and wait for all
mo¬ving parts to stop completely before clearing.
ee)
Do not insert branches larger than those specified in
the technical data into the machine.
ff)
Make sure that the loading hopper is empty before
starting the machine.
gg)
Add oil till the full marking before start using the
device. If the oil level is low, engine will not start or it
might shut down.
hh)
Oil leaking from the machine should be reported
to the appropriate services or comply with legal
requirements applicable in the area of use.
ii)
Danger! Danger to health and the risk of explosion of
the internal combustion engine.
jj)
Poisonous carbon monoxide is present in the
engine exhaust. Remaining in a carbon monoxide
environment may lead to losing consciousness or
even death. Do not run the engine in a closed space.
12
EN
kk)
Protect the engine from heat, sparks and flame. Do
not smoke in the vicinity of the chipper!
ll)
Petrol is flammable and explosive. Before refuelling
the engine should be turned off and cooled down.
mm) Warning! Risk of engine damage due to wrong fuel.
nn)
The battery is live. Do not touch the terminals and
battery connectors. Disconnecting the battery
connectors should be carried out in the correct
order.
oo)
Ggg) Do not use the machine for grinding
construction debris, plastics, paper products, ropes
or string or any material which may contain metal.
PLEASE NOTE: Remove all nails, ropes, string or
stones which can be embedded in parts of the plant
(e.g. in the roots, etc.) before feeding the material
into the machine.
pp)
If the machine starts making unusual noise or
vibrates, turn off the engine, disconnect the spark
plug cable and keep it away from the spark plug to
prevent accidental starting. Then wait 5 minutes for
the engine to cool and check for damage.
qq)
Before use, check the plants to be shredded. Remove
all debris and miscellaneous objects that could
be thrown around. Remove soil from root before
shredding them.
rr)
Wait for the blade to turn at full speed before
inserting the branches into the loading hopper.
ss)
Do not put soft waste into the chimney (eg: kitchen
waste).
tt)
Avoid inserting too many plants at a time, that may
block the loading hopper.
uu)
Save a few dry branches for the end: these will help
clean the device.
vv)
Do not switch off the appliance until all the branches
have come out of the outlet chute. Otherwise, the
chute may be blocked the next time you turn on the
device.
ww) Do not allow shredded material to pile up to a level
where it may block the outlet chute. Avoid inserting
too many plants, the plants may pile up to a level
of the shredder and be ejected through the loading
hopper.
xx)
Organic materials may contain large amounts of
water and sap which may stick to appliance parts.
To avoid this, let them dry out for a few days before
shredding them.
ATTENTION! Despite the safe design of the device
and its protective features, and despite the use of
additional elements protecting the operator, there
is still a slight risk of accident or injury when using
the device. Stay alert and use common sense when
using the device.
3. USE GUIDELINES
The machine is designed for grinding branches, shrubs,
weeds, shoots and long grass with a diameter not
exceeding the value given in the technical data table.
The user is liable for any damage resulting from
unintended use of the device.
28.06.2021
3.1. DEVICE DESCRIPTION
HT-HECTOR 212T
2
3
4
5
1
180 [ ° ]
13
12
8
9
6
7
HT-HECTOR 212T
4
1
2
5
3
13
180 [ ° ]
11
12
14
7
8
9
10
6
1.
Loading hole
2.
Emergency stop button
3.
Fuel tank
4.
Muffler
5.
Air filter
6.
Wheel
7.
Transmission belt cover
8.
Cylinder housing (block)
9.
Support
10.
Transport handle
11.
Transport handle joint
12.
Outlet chute
13.
Spout with adjustable angle
14.
Loading hopper
3.2. PREPARING FOR USE
APPLIANCE LOCATION.
The machine should be used outside closed spaces, on a
stable, level surface, preferably on grass or on the ground.
Do not place the machine on concrete, tarmac on other
hard surfaces, because chips and other residue ejected by
the machine may bounce off and cause a hazard.
WORK CONDITIONS
Inspect the material which is to be shredded and make
sure there is enough space above the machine to load the
material. It is recommended to choose a place of work as
close as possible to the place where the chips are used.
This will reduce the need to carry the processed material
to a minimum.
Keep a safe distance from the chip discharge area. Ensure
which all bystanders, children, animals or valuables are also
at a safe distance from the chip discharge area.
28.06.2021
EN
ASSEMBLING THE APPLIANCE
ATTENTION! This product's exploded view can
be found on the last pages of the operating
instructions (pp. 59).
Nr. Teil
Beschreibung
1
Base
2
Wheel axel
3
Knife
4
Wheel
5
Inner protection plate of belt
6
Coupling
7
Bearing
8
Roller
9
42x9x5 spacer
10
Belt shield
11
Bearing mounting frame
12
Cylinder/roller
13
Rubber washer
14
Support foot
15
Bolt
16
B-bolt
17
Transport handle mountng
18
Transport handle
19
Transport handle joint
20
Outlet chute
21
Adjustable end of outlet chute
22
Engine mounting
23
Loading hopper
24
Belt
28
Chain
29
Lower blade
31
Engine
38
M10x24 hex bolt
39
Ø25 washer
40
M25 open nut
41
Pin
42
M10 locking nut
43
M10x8 hex bolt
44
Emergency stop
45
Switch cover
13
Publicidad
