Dell EMC PowerEdge T130 Manual Del Propietário página 101

2 Mientras se inicia, presione F2 para abrir System Setup (Configuración del sistema) y compruebe que la información del procesador
corresponda con la nueva configuración del sistema.
3 Ejecute los diagnósticos del sistema para verificar que el nuevo procesador funciona correctamente.
Unidad de fuente de alimentación
El sistema admite unidades de fuente de alimentación de CA de 290 W.
Removing the power supply unit (PSU)
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
3 Keep the Phillips #2 screwdriver ready.
Steps
1 Disconnect all the power cables from the PSU to the system board.
2 Remove the screws securing the PSU to the chassis.
3 Press the release tab beside the PSU, and slide the PSU toward the front of the system.
4 Lift the PSU out of the chassis.
Instrucciones de seguridad.
Antes de trabajar en el interior de su equipo.
Instalación y extracción de los componentes del sistema 101