Dell EMC PowerEdge T130 Manual Del Propietário página 75

Figure 31. Removing the optical drive
1 SATA and power cable
3 optical drive
Next steps
1 Install the optical drive.
2 Install the hard drive cage.
3 Reconnect the disconnected data and power cables to the hard drives and optical drive.
4 Install the bezel.
5 Reconnect the peripherals disconnected from the control panel assembly.
6 Follow the procedure listed in
Related links
Removing the bezel
Removing the hard drive cage
Installing the optical drive
Installing the hard drive cage
Installing the bezel
Installing the optical drive
Only slim 9.5 mm SATA DVD-ROM drive or DVD+/-RW drive can be installed in your system. External optical drives can be connected
through USB ports.
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Después de trabajar en el interior de su
2 release tab
4 hard drive cage
equipo.
Instalación y extracción de los componentes del sistema 75