Dell EMC PowerEdge T130 Manual Del Propietário página 59

Figure 17. Removing the hard drive cage
1 hard drive cage latch
3 hard drive cage
Next steps
1 Install the hard drive cage.
2 If disconnected, connect the power and data cables to the hard drives and the optical drive in the hard drive cage.
3 Install the bezel.
4 Reconnect the peripherals disconnected from the control panel assembly.
5 Follow the procedure listed in
Related links
Removing the bezel
Installing the hard drive cage
Installing the bezel
Installing the hard drive cage
Prerequisites
1 Ensure that you follow the
2 Follow the procedure listed in
3 Disconnect all peripherals connected to the control panel assembly.
4 Remove the bezel.
Después de trabajar en el interior de su
Instrucciones de seguridad.
Antes de trabajar en el interior de su
2 hard drive cage guide screw (2)
equipo.
equipo.
Instalación y extracción de los componentes del sistema 59