Dell EMC PowerEdge T130 Manual Del Propietário página 55

2 Follow the procedure listed in
3 Disconnect all peripherals connected to the control panel assembly.
4 Remove the bezel.
5 Keep the Phillips #2 screwdriver ready.
Steps
1 Disconnect the control panel and USB data cables from the system board.
2 Remove the screws securing the control panel assembly to the system.
3 Slide the control panel assembly upward to release it.
4 Pull the control panel assembly along with the cables out of the system.
Figure 15. Removing the control panel assembly
1 screw (3)
3 control panel assembly guide (2)
Next steps
1 Install the control panel assembly.
2 Install the bezel.
3 Follow the procedure listed in
Antes de trabajar en el interior de su
Después de trabajar en el interior de su
equipo.
2 control panel assembly
4 control panel assembly guide slot (2)
equipo.
Instalación y extracción de los componentes del sistema 55