Dell EMC PowerEdge T130 Manual Del Propietário página 53

1 Ensure that you follow the
2 Follow the procedure listed in
Steps
1 Disconnect the intrusion switch cable from the system board.
2 Slide the intrusion switch and push it out of the slot on the chassis.
Figure 13. Removing the intrusion switch
1 intrusion switch slot
3 intrusion switch cable
Next steps
1 Install the intrusion switch.
2 Follow the procedure listed in
Related links
Installing the intrusion switch
Installing the intrusion switch
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Instrucciones de seguridad.
Antes de trabajar en el interior de su
Después de trabajar en el interior de su
equipo.
2 intrusion switch
equipo.
Instalación y extracción de los componentes del sistema 53