Dell EMC PowerEdge T130 Manual Del Propietário página 72

Figure 28. Removing the optical drive filler
1 optical drive bay
3 optical drive filler
Next steps
1 Install the hard drive cage.
2 Reconnect the disconnected data and power cables to the hard drives and optical drive.
3 Install the bezel.
4 Reconnect all peripherals disconnected from the control panel assembly.
5 Follow the procedure listed in
Related links
Removing the bezel
Removing the hard drive cage
Installing the hard drive cage
Installing the bezel
Installing the optical drive blank and filler
The optical drive blank is on the bezel and the optical drive filler is located in the optical drive slot on the hard drive cage.
Prerequisites
1 Ensure that you follow the
2 Follow the procedure listed in
3 Disconnect all peripherals connected to the control panel assembly.
4 Remove the bezel.
5 If connected, disconnect the power and data cable from the optical drive and hard drives.
6 Remove the hard drive cage.
72 Instalación y extracción de los componentes del sistema
Después de trabajar en el interior de su
Instrucciones de seguridad.
Antes de trabajar en el interior de su
2 tabs (4)
4 hard drive cage
equipo.
equipo.