Dell EMC PowerEdge T130 Manual Del Propietário página 49

3 cover release latch
Next steps
1 Install the system cover.
2 Place the system upright on its feet on a flat and stable surface.
3 Reconnect the peripherals and connect the system to the electrical outlet.
4 Turn the system on, including any attached peripherals.
Related links
Installing the system cover
Installing the system cover
Prerequisites
1 Ensure that you follow the
2 Follow the procedure listed in
3 Ensure that all internal cables are connected and placed out of the way and that no tools or extra parts are left inside the system.
Steps
1 Align the tabs on the system cover with the corresponding slots on the system chassis.
2 Lower the system cover onto the chassis until it clicks into place.
Figure 9. Installing the system cover
1 slots
3 cover release latch
Next steps
1 Place the system upright on its feet on a flat and stable surface.
Instrucciones de seguridad.
Antes de trabajar en el interior de su
4 system cover
equipo.
2 tabs
4 system cover
Instalación y extracción de los componentes del sistema 49