Related links
Removing the bezel
Removing the hard drive cage
Removing the optical drive blank and filler
Installing the optical drive
Installing the hard drive cage
Installing the bezel
System memory
Your system supports DDR4 ECC unbuffered DIMMs (UDIMMs).
NOTE:
MT/s indicates memory module speed in Mega Transfers per second.
Memory bus operating frequency can be 1600 MT/s, 1866 MT/s, 2133 MT/s, or 2400 MT/s depending on the following factors:
•
System profile selected (for example, Performance Optimized, Custom, or Dense Configuration Optimized)
•
Maximum supported memory module frequency of the processors
The system contains four memory sockets — two sets of 2–sockets each. Each 2–socket set is organized into one channel. In each 2-
socket set, the first socket release lever is marked white and the second socket release lever is marked black.
Figure 33. Memory socket locations on the system board
Memory channels are organized as follows:
Processor 1
channel 0: memory sockets A1 and A3
channel 1: memory sockets A2 and A4
The following table shows the memory populations and operating frequencies for the supported configurations:
Instalación y extracción de los componentes del sistema
77