Removing a hard drive carrier from the hard drive cage
Prerequisites
CAUTION:
Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1
Ensure that you follow the
2
Follow the procedure listed in
3
Disconnect all peripherals connected to the control panel assembly.
4
Remove the bezel.
5
Remove the power and data cables from the hard drives and optical drive in the hard drive cage.
6
Remove the hard drive cage.
Step
Press the retention clips inward and pull the hard drive out of the hard drive cage.
Figure 19. Removing hard drive carrier from the hard drive cage
1
hard drive carrier
3
retention clips (2)
Next steps
1
Install the hard drive carrier into the hard drive cage.
2
Install the hard drive cage.
3
Reconnect the power and data cables to the hard drives and optical drive in the hard drive cage.
4
Install the bezel.
Instrucciones de
seguridad.
Antes de trabajar en el interior de su
equipo.
2
hard drive
4
hard drive cage
Instalación y extracción de los componentes del sistema
61