Dell EMC PowerEdge T130 Manual Del Propietário página 92

Figure 44. Removing the iDRAC port card
1 iDRAC port
3 iDRAC port card connector
5 captive screw
Next steps
1 Install the iDRAC port card.
2 If disconnected, reconnect the network cable.
3 Follow the procedure listed in the After working inside your system section.
Related links
Installing the optional iDRAC port card
Installing the optional iDRAC port card
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the safety guidelines listed in the Safety instructions section.
2 Follow the procedure listed in the Before working inside your system section.
92 Instalación y extracción de los componentes del sistema
2 SD vFlash media card slot
4 iDRAC port card holder