Dell EMC PowerEdge T130 Manual Del Propietário página 64

3 If connected, disconnect the power and data cables from the hard drive in the hard drive bay.
Step
Press the retention clips inward and lift the hard drive carrier from the hard drive bay.
Figure 21. Removing a hard drive carrier from the hard drive bay
1 hard drive
3 hard drive power and data cables (2)
Next steps
1 Install the hard drive carrier into the hard drive bay.
2 If disconnected, connect the power and data cables to the hard drives in the hard drive bay.
3 Follow the procedure listed in
Related links
Installing a hard drive carrier into the hard drive bay
Installing a hard drive carrier into the hard drive bay
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
64 Instalación y extracción de los componentes del sistema
Después de trabajar en el interior de su
Instrucciones de seguridad.
Antes de trabajar en el interior de su
2 retention clips on hard drive carrier (2)
equipo.
equipo.