Dell EMC PowerEdge T130 Manual Del Propietário página 65

Step
Insert the hard drive carrier into the hard drive bay until it clicks into place.
Figure 22. Installing a hard drive carrier into the hard drive bay
1 hard drive
3 hard drive power and data cables (2)
Next steps
1 If disconnected, connect the power and data cables to the hard drive in the hard drive bay.
2 Follow the procedure listed in
Removing a hard drive from a hard drive carrier
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
3 Depending on your requirement, remove the hard drive carrier from the hard drive cage or the hard drive bay.
Step
To release the hard drive, flex the sides of the hard drive carrier.
Después de trabajar en el interior de su
Instrucciones de seguridad.
Antes de trabajar en el interior de su
2 retention clips on hard drive carrier (2)
equipo.
equipo.
Instalación y extracción de los componentes del sistema 65