Dell EMC PowerEdge T130 Manual Del Propietário página 82

Ventilador de refrigeración
El sistema sólo admite un ventilador de refrigeración.
Removing the cooling fan
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
CAUTION: Do not remove or install the cooling fan by holding the blades.
CAUTION: Never operate your system with the system fan removed. System can overheat and result in shutdown of the system
and loss of data.
1 Ensure that you follow the
2 Follow the procedure listed in
Steps
1 Disconnect the cooling fan power cable from the system board.
2 To ease removal of the cooling fan, stretch the grommets securing the fan to the chassis.
3 Hold the cooling fan by the sides, and slide it out of the grommet.
4 Repeat steps 2 and 3 to release the fan from the remaining grommets.
82 Instalación y extracción de los componentes del sistema
Instrucciones de seguridad.
Antes de trabajar en el interior de su equipo.