Dell EMC PowerEdge T130 Manual Del Propietário página 62

5 Reconnect the peripherals disconnected from the control panel assembly.
6 Follow the procedure listed in
Related links
Removing the bezel
Removing the hard drive cage
Installing a hard drive carrier into the hard drive cage
Installing the hard drive cage
Installing the bezel
Installing a hard drive carrier into the hard drive cage
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
3 Disconnect all peripherals connected to the control panel assembly.
4 Remove the bezel.
5 Remove the power and data cables from the hard drives and optical drive in the hard drive cage.
6 Remove the hard drive cage.
Step
Insert the hard drive carrier into the hard drive cage until it clicks into place.
62 Instalación y extracción de los componentes del sistema
Después de trabajar en el interior de su
Instrucciones de seguridad.
Antes de trabajar en el interior de su
equipo.
equipo.