Dell EMC PowerEdge T130 Manual Del Propietário página 127

4 Ensure that each expansion card is firmly seated in its connector.
5 Install the sistema cover.
6 Turn on the sistema and attached peripherals.
7 If the problem is not resolved, turn off the sistema and attached peripherals, and disconnect the sistema from the electrical outlet.
8 Remove the sistema cover.
9 Remove all expansion cards installed in the sistema.
10 Install the sistema cover.
11 Run the appropriate diagnostic test. See the Using system diagnostics section.
If the tests fail, see the Getting help section.
12 For each expansion card you removed in step 8, perform the following steps:
a Turn off the sistema and attached peripherals, and disconnect the sistema from the electrical outlet.
b Remove the sistema cover.
c Reinstall one of the expansion cards.
d Install the sistema cover.
e Run the appropriate diagnostic test. See the Using system diagnostics section.
Paso siguiente
If the problem persists, see the Getting help section.
Troubleshooting processors
Requisito
PRECAUCIÓN: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and
simple repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
Pasos
1 Run the appropriate diagnostics test. See the Using system diagnostics section.
2 Turn off the sistema and attached peripherals, and disconnect the sistema from the electrical outlet.
3 Remove the sistema cover.
4 Ensure that the processor and heat sink are properly installed.
5 Install the sistema cover.
6 Run the appropriate diagnostic test. See the Using system diagnostics section.
7 If the problem persists, see the Getting help section.
Mensajes del sistema
Para obtener una lista de los mensajes de eventos y errores generada por el firmware del sistema y los agentes que controlan los
componentes del sistema, consulte Dell Event and Error Messages Reference Guide (Guía de referencia de los mensajes de eventos y
errores de Dell) en Dell.com/openmanagemanuals > OpenManage software.
Mensajes de aviso
Los mensajes de aviso le alertan sobre un posible problema y le solicitan que responda antes de que el sistema continúe con una tarea. Por
ejemplo, antes de dar formato a una unidad de disco duro, un mensaje le avisará que podría perder todos los datos del disco duro. Los
mensajes de aviso suelen interrumpir la tarea y usted debe responder escribiendo una y (para sí) o n (para no).
NOTA: Warning messages are generated by either the application or the operating system. For more information, see the
documentation that shipped with the operating system or application.
Troubleshooting your sistema 127