Dell EMC PowerEdge T130 Manual Del Propietário página 56

Related links
Removing the bezel
Installing the control panel assembly
Installing the bezel
Installing the control panel assembly
Prerequisites
CAUTION: Many repairs may only be done by a certified service technician. You should only perform troubleshooting and simple
repairs as authorized in your product documentation, or as directed by the online or telephone service and support team.
Damage due to servicing that is not authorized by Dell is not covered by your warranty. Read and follow the safety instructions
that are shipped with your product.
1 Ensure that you follow the
2 Follow the procedure listed in
3 Remove the bezel.
4 Keep the Phillips #2 screwdriver ready.
Steps
1 Insert the control panel assembly into the guide slot and slide it downward to lock the assembly into place.
2 To secure the control panel, insert and tighten the screws to the chassis.
3 Route the control panel and USB data cables through the chassis clip.
4 Connect the control panel and USB data cables to the system board.
56 Instalación y extracción de los componentes del sistema
Instrucciones de seguridad.
Antes de trabajar en el interior de su equipo.