Publicidad
Preset Tuning
Storing Stations Manually
This procedure shows you how to select
and store FM and AM (MW/LW) stations
one by one. This procedure is useful if you
want to select just which stations to store,
:
and for storing FM stations or FM RDS
you want to automatically store FM and/or
FM RDS station in your broadcast area, do
"MEMORY" appears to show that the
$T-5361
ST-S261
tuner is ready a store a station.
If the stations is tuned in with the
automatic tuning, manual tuning or
direct tuning: The lowest vacant code
appears. If you want to store the station
in that preset code, press ENTER. If you
want to specify the other preset code, go
to step 3.
If the station is tuned in with the preset
tuning: The preset code of that station
blinks. If you want to store the station in
the same preset code, press ENTER. If
you want to specify the othercode, go to
step 3.
3 Enter the two-character code
under which you want the station
stored.
Press SHIFT to select A, B, orC. The
letter you choose appears on the display.
4 Perform steps 1 through3 for
other stations.
(to be «mtinued)
Publicidad
