Publicidad
RDS Receiving
Searching for RDS Stations
which Broadcast Traffic
Reports
This procedure shows you how to search
through all the stored RDS stations which
currently broadcast traffic reports.
Note
For this function, you should store RDS
stations beforehand.
1 Press MENU.
until "Traffic" appears on the
MENU
display and press ENTER.
The unit enters search mode. While
searching, "Search" and "Traffic" are
displayed alternately and the unit
receives each station which is currently
broadcasting a traffic report for about 8
seconds.
3 When the station you want to
listen to is received, press ENTER.
2
If you do not want the received station,
press MEMORY/NEXT until the desired
station is received. Each time you press
TUNING/SELECT
MEMORY/NEXT, the station in a
:
if the traffic report ends...
=> hi
Speseeie;
=> | ENTER
"Different" appears and the tuner
receives another station in the Lowest
preset code which is currently
broadcasting a traffic report. Otherwise,
the tuner returns to the origina] station.
64.
Publicidad
