Publicidad
38
POWER
MENU
5
comes
Geosss
©
ae
crak
as
ST-S261
MEMORY/NEXT
RETURN
Preset Tuning
(continued)
If you make a mistake during
entry
Perform steps 2 and 3 again.
To cancel the storing while the
MEMORY indicator is lit
¢ Press RETURN or
¢ Press MEMORY/NEXT.
The following settings will be
stored along with the station
ST-S361: ANT (A or B), ANT ATT, IF Band
and FM MODE
ST-S261: FM MODE
If you store a new station in the
same code
The previously stored station is erased.
Each code can hold only one station.
To tune in stored stations
See page 40.
To erase stored stations one by
one
1 Press MENU.
2 Rotate the TUNING/SELECT knob until
"Clear" appears and then press ENTER.
3 Rotate the TUNING/SELECT knob until
the preset station to be erased appears
and then press ENTER.
The frequency stored in the specified
code is erased and the digit of the preset
code disappears.
Repeat steps 1 through 3 for other stored
stations to be erased.
_
To erase all stored stations ata
time
1 Turn off the power.
2 Hold down 5 and MENU, and press
POWER to turn on the poweragain.
Notes
* If you move to another area, {© this
procedure again to store the stations for
the new broadcast area.
* The stations remain stored innmemory for
up to one month after turning the power
off.
Publicidad
