Publicidad
Idiomas disponibles
Idiomas disponibles
Key-operated switch
The key-operated switch turns the device on and off.
1. Open cover.
2. Insert the ignition key.
3. Turn the ignition key one switch position forward (I). The de-
vice starts and performs a self-test.
4. Wait briefly, then turn the ignition key one more switch position
forward (II). The display shows "ON", the device is ready to
drive.
5. To switch off the device, turn the key-operated switch to the off
position (0)
6. Remove the ignition key to prevent unauthorised use of the
device.
Note
Close the key-operated switch with the cover to prevent dust and
moisture from entering when there is no ignition key in the lock.
Control lever
Steering wheel adjustment lever
1
Open/close the waste container flap
2
Raise/lower the waste container high dumping system
3
Switching the hydraulics on/off
4
Note
When the hydraulics are switched on, the brushes start to rotate.
They are lowered with the function switches.
32
Signal horn
1
Working light On/Off
2
Filter cleaning for dust filter
3
Rotating beacon and blue spot on/off
4
Water pump switch
5
Upper position: Water pump for sprayer unit switched on.
Central position: Water pump is switched off.
Lower position: Water pump switched on for wet cleaning
mode.
Lowering/raising the side brush/scrubbing deck
6
Switch for cleaning type: Sweeping or scrubbing
7
Upper position: Wet cleaning mode, the suction bar lowers
and the suction turbine switches on.
Central position: Switched off, the brush head is raised.
Lower position: Sweeping cleaning mode, the sweeping
blower switches on. The suction bar remains up.
Direction lever on steering wheel
F
Forwards travel direction
N
Neutral position (no travel direction)
R
Reverse travel direction
NORMAL
Normal performance class
ECO
ECO operation performance class
● Push the lever forward to drive forwards.
● Pull the lever backward to drive in reverse.
● Turn the twist grip in the desired direction to set the perfor-
mance class.
English
Function switches
Publicidad
