Publicidad
Idiomas disponibles
Idiomas disponibles
CAUTION
Risk of damage!
If fresh and waste water remain in the tanks for a longer period of
time, the valves and spray nozzles become clogged. If the suc-
tion bar is not cleaned, bacteria will multiply.
Empty the waste water tank and fresh water tank immediately af-
ter cleaning, then clean the tanks, spray nozzles and suction bar.
(See chapter "Cleaning")
5. Empty the waste container. (See chapter "Sweeping")
6. Pull the key.
Emptying the waste water tank
When the waste water tank is full, the suction turbine switches off
and the indicator light of "Waste water tank full" lights up.
Cap
1
Support
2
Dosing unit
3
Waste water drain hose
4
Drain hose connection
5
1. Remove the drain hose from the support.
2. Unscrew the lock from the drain hose.
The water flow can be reduced by squeezing the dosing unit.
3. After emptying, hang the drain hose in the support and then
press it into the connection.
Note
Depending on the type of dirt, the cleaning flap must be opened
regularly and the tank flushed.
Safety bracket
1
Waste water tank
2
Waste water drain hose
3
Cleaning flap
4
4. If necessary, open the cleaning flap and rinse out the tank.
36
Empty the fresh water tank
Cap
1
Support
2
Dosing unit
3
Drain hose connection
4
Fresh water drain hose
5
1. Remove the drain hose from the support.
2. Unscrew the lock from the drain hose.
3. The water flow can be reduced by squeezing the dosing unit.
4. After emptying, hang the drain hose in the support and then
press it into the connection.
The device is equipped with a water spraying unit.
An electric water pump dispenses water from the fresh water tank
to an adjustable spray nozzle.
The water spraying unit is suitable for a variety of cleaning tasks,
especially for cleaning the waste water tank or device parts.
The water spraying unit is located at the rear of the vehicle.
ATTENTION
Risk of damage!
Control elements, electrical and electronic components must not
be cleaned with the spraying unit.
The water spraying unit is activated via a function switch.
● Press the function switch to switch on and off.
Note
The switch is used to turn the water pump on and off. In the upper
switch position (spray gun symbol), the water spraying device is
switched on. The water pump is switched off when the switch is
at the middle switch setting.
English
Water spraying unit
Publicidad
