Kärcher B300 RI BP Manual Del Usuario página 43

Cleaning the hydraulic oil cooler
CAUTION
Risk of burns!
Allow the vehicle to cool down sufficiently prior to any mainte-
nance and repair work.
Do not touch hot parts of the hydraulics.
The oil cooler is located on the left side of the device, at the very
front under the hood.
Hydraulic oil cooler
1
Cooling fins
2
Note
A dirty cooler can easily lead to overheating.
1. Check the radiator and cooling fins for dirt.
2. Remove dirt with a soft brush, compressed air (max. 5 bar) or
water (at low pressure).
Replacement work
Fuse cover
1
Fuse cover lock
2
Fuse holder
3
Fuses
Fuses
4
Note
Use only fuses with the same fuse rating. Never use other values
or fuse bridges!
1. Check the fuses, replace with a new fuse of the same rating if
necessary.
English 43