SKF Lubrication Systems Germany GmbH
EMAIL: robert.collins@skf.com WEBSITE:
This Declaration of Conformity is issued
under sole responsibility of the
manufacturer Alemite, L.L.C. hereby
declares that the machinery stated below:
Name: RAM pump
Model number(s): 9918-A
Description: Low-pressure stub pump
Year of CE: 2023
consisting of the following incomplete
machines:
Designation: Air motor
Model number(s): 339413
in its intended use, is in conformity with the
relevant union harmonization legislation:
Machinery Directive 2006/42/EC
Hazardous Substances 2011/65/EU and
(EU) 2015/863 (RoHS)
Noise Emissions Directive 2000/14/EC
(NED)
I, the undersigned of Alemite, L.L.C., do hereby declare that the equipment specified above, in its intended use, conforms to the requirements
of the above directives and harmonized standards at the time of placing the above product on the market.
___________________________________
Robert Collins
Technical Compliance Manager
St. Louis, MO, U.S.A.
2023/03/31
Declaration of Conformity *
Manufacturer name/address:
Alemite, L.L.C.
167 Roweland Drive
Johnson City, TN 37601 U.S.A.
TEL: +1 (314) 679-4200 FAX: +1 (314) 679-4367
Authorized to compile the technical file:
Heinrich-Hertz-Straße 2-8
69190 Walldorf, Germany
and conforms to the following harmonized
standards:
EN ISO 4413: 2010
Hydraulic fluid power – general rules and
safety requirements for systems and their
components
EN ISO 12100: 2010
Safety of machinery. General principles
for design. Risk assessment and risk
reduction.
EN ISO 809: 1998+A1:2009
Pumps and pump units for liquids –
common safety requirements
EN 12162: 2009
Liquid pumps – safety requirements –
procedure for hydrostatic testing
EN 20361:2019
Liquid pumps and pumps units - Noise
test code - Grades 2 and 3 of accuracy
www.skf.com
EN IEC 63000:2018
Technical documentation for the
assessment of electrical and electronic
products with respect to the restriction of
hazardous substances
The manufacturer maintains a technical file
summary sheet containing test reports and
product documentation:
Technical file summary sheet number:
RA670790
*
3
DOCUMENT NUMBER
SER670790
Indicates change.