YASKAWA CIPR-GA50C Serie Manual De Instrucciones página 21

Table 1.2 Blank Cover Components and Functions
Sym
Name
bol
USB Terminal
A
Pass-through
RJ-45 Connector
B
Pass-through
◆
Mechanical Installation
WARNING
do not install the drive near flammable or combustible materials. Attach the drive to metal or other
noncombustible material. Flammable and combustible materials can start a fire and cause serious injury
or death.
CAUTION
move the drive. If the drive or covers fall, it can cause moderate injury.
NOTICE
Guidelines, it can cause incorrect operation and damage to electrical devices.
NOTICE
the drive during drive installation. Put a temporary cover over the drive during installation. Remove the
temporary cover before start-up. Unwanted objects inside of the drive can cause damage to the drive.
NOTICE
that you observe correct electrostatic discharge (ESD) procedures. If you do not follow procedures, it can
cause ESD damage to the drive circuitry.
Note:
Do not put drive peripheral devices, transformers, or other electronics near the drive. Shield the drive from
electrical interference if components must be near the drive. Components near the drive can cause incorrect
drive operation from electrical interference.
■
Installation Environment
The installation environment is important for the lifespan of the product and to make sure
that the drive performance is correct. Make sure that the installation environment agrees
with these specifications.
Environment
Indoors
Area of Use
Overvoltage Category III
Power Supply
YASKAWA TOMPC7106173UA GA500 Installation and Operation Instruction
Pass-through point to connect a USB cable to the drive to support the DriveWizard
PC tool and the DriveWizard Mobile App. Uses a USB cable (USB standard 2.0,
type A - mini-B) to connect the drive to a PC, Android smartphone, or tablet.
Connects to the drive. Use an RJ-45 8-pin straight UTP CAT5e extension cable to
use the keypad option to program the drive.
Fire Hazard. Do not put flammable or combustible materials on top of the drive and
Crush Hazard. Tighten terminal cover screws and hold the case safely when you
Install the drive as specified by EMC Guidelines. If you do not obey the EMC
Do not let unwanted objects, for example metal shavings or wire clippings, fall into
Damage to Equipment. When you touch the drive and circuit boards, make sure
Function
Conditions
1 English
21