YASKAWA CIPR-GA50C Serie Manual De Instrucciones página 355

Input/Output
Pulse train output
Pulse train input
Safe disable input
Serial communication input/output
24 V external power supply
Drive Motor Overload and Overheat Protection
The drive motor overload and overheat protection function complies with the National
Electric Code (NEC) and the Canadian Electric Code, Part I (CEC).
Set the Motor Rated Current and L1-01 through L1-04 [Motor Overload Protection
Select] correctly to enable motor overload and overheat protection.
Refer to the control method and set the motor rated current with E2-01 [Motor Rated
Current (FLA)], E5-03 [PM Motor Rated Current (FLA)], or E9-06 [Motor Rated Current
(FLA)].
E2-01: Motor Rated Current (FLA)
No.
Name
(Hex.)
E2-01 Motor Rated
Current (FLA)
(030E)
Note:
• If E2-01 < E2-03 [Motor No-Load Current], the drive will detect oPE02 [Parameter Range Setting Error].
• When the drive model changes, the display units for this parameter also change.
–0.01 A: B001 to B018, 2001 to 2042, 4001 to 4023
–0.1 A: 2056 to 2082, 4031 to 4060
YASKAWA TOMPC7106173UA GA500 Installation and Operation Instruction
Terminals
MP, AC
RP, AC
H1, H2, HC
D+, D-, AC
PS, AC
Description
V/f OLV OLV/PM AOLV/PM EZOLV OLV/PM
Sets the motor rated current in amps.
10 Attachment
Power Supply Specifications
Uses the LVLC power supply in the
drive.
Use the UL Listed class 2 power
supply for external power supply.
Uses the LVLC power supply in the
drive.
Use the UL Listed class 2 power
supply for external power supply.
Uses the LVLC power supply in the
drive.
Use the UL Listed class 2 power
supply for external power supply.
Uses the LVLC power supply in the
drive.
Use the UL Listed class 2 power
supply for external power supply.
Use the UL Listed class 2 power
supply.
Default
(Range)
Determined by
o2-04, C6-01
(10% to 200% of
the drive rated
current)
355