YASKAWA CIPR-GA50C Serie Manual De Instrucciones página 30
Ocultar thumbs
Ver también para CIPR-GA50C Serie:
- Instrucciones de instalación y operación (310 páginas)
Publicidad
Idiomas disponibles
Idiomas disponibles
1 English
No.
Name
(Hex.)
C6-02
Carrier Frequency
Selection
d1-01 - d1-
Reference 1 to 16
16
RUN
d1-17
Jog Reference
RUN
d2-01
Frequency Reference
Upper Limit
d2-02
Frequency Reference
Lower Limit
E1-01
Input AC Supply
Voltage
E1-04
Maximum Output
Frequency
E1-05
Maximum Output
Voltage
E1-06
Base Frequency
E1-09
Minimum Output
Frequency
E2-01
Motor Rated Current Sets the motor rated current in amps.
E2-11
Motor Rated Power
H1-01 - H1-
Terminal S1 to S7
07
Function Selection
H2-01
Term MA/MB-MC
Function Selection
H2-02
Term P1-C1
Function Selection
H2-03
Term P2-C2
Function Selection
30
Sets the carrier frequency for the transistors in the drive. When A1-02 = 6
[Control Method Selection = AOLV/PM], you can only set C6-02 = 2 [5.0
kHz (AOLV/PM: 4.0 kHz)].
1: 2.0 kHz, 2: 5.0 kHz (4.0 kHz for AOLV/PM), 3: 8.0 kHz, 4: 10.0 kHz,
5: 12.5 kHz, 6: 15.0 kHz, 7: Swing PWM1 (Audible Sound 1),
8: Swing PWM2 (Audible Sound 2), 9: Swing PWM3 (Audible Sound 3),
A: Swing PWM4 (Audible Sound 4), B: Leakage Current Rejection PWM,
F: User Defined (C6-03 to C6-05)
Sets the frequency reference in the units from o1-03 [Frequency Display
Unit Selection.
Sets the Jog frequency reference in the units from o1-03 [Frequency
Display Unit Selection]. Set H1-xx = 6 [MFDI Function Select = Jog
Reference Selection] to use the Jog frequency reference.
Sets maximum limit for all frequency references. The maximum output
frequency is 100%.
Sets minimum limit for all frequency references. The maximum output
frequency is 100%.
Sets the drive input voltage.
Sets the maximum output frequency for the V/f pattern.
Sets the maximum output voltage for the V/f pattern.
Sets the base frequency for the V/f pattern.
Sets the minimum output frequency for the V/f pattern.
Sets the motor rated output in the units from o1-58 [Motor Power Unit
Selection].
Sets functions for MFDI terminals S1 to S7.
Sets a function for MFDO terminal MA-MC or MB-MC.
Sets a function for MFDO terminal P1-C1.
Sets a function for MFDO terminal P2-C2.
YASKAWA TOMPC7106173UA GA500 Installation and Operation Instruction
Description
Publicidad
